PPMS QD Dynacool

PPMS QD DynaCool is a multifunctional instrument for measuring various material properties over a range of temperature (400K – 1.8 K) and applied magnetic field (± 14T). This system is capable of cooling a standard PPMS sample puck from 300K to a stable 1.9K, in under 40 minutes. Currently, the system is equipped with options for measuring electrical transport, thermal transport, magnetic torque and heat capacity. A horizontal rotator option also available for the sample to be rotated with respect to the applied field axis while performing resistivity measurements.

Technical specifications:
1) Electrical Transport Option (ETO): Simultaneous measurement of resistance or hall effect on up to two channels with phase angle and quadrature voltage can be measured using ETO option. Pre selected frequencies for channels 1 and 2 prevent cross talk and maximize signal to noise ratio and resistance can be measured from 1 μΩ – 10 MΩ using a four-wire setup or from 10 MΩ – 5 GΩ using a two-wire connection. Additional functions like I V curve profiling and differential resistance measurements also possible.
2) Resistivity (DC): The resistivity option is very similar to ETO but has 3 channels so up to 3 samples can be measured simultaneously. This option is suitable for samples for smaller measurement range (10 µ Ω to 4 M Ω) and a lower maximum excitation current (5 mA).
3) Thermal Transport Option (TTO): Using TTO all three constituent experimental parameters of the thermoelectric figure of merit (ZT) can be measured simultaneously and continuously as a function of temperature. ZT is automatically calculated and can be evaluated across the full range of temperature (1.9 to 400K) and field fields (+/-14T).
4) Heat Capacity Option (HCO): The Heat Capacity Option support a puck based microcalorimeter design capable of measuring sample heat capacity across the full range of temperature and field. Typical measurements collect heat capacity as a function of temperature and constant field are possible after using the automated field calibration function of the software.
5) Vibration Sample Magnetometer Option (VSM): The VSM measures magnetic properties of samples using a motor mounted on top of the sample chamber. The static (DC) magnetic moment of the sample can be measured as a function of temperature or field. Measurements as a function of sweeping the temperature or field are also possible.
6) Horizontal Rotator Option: The Horizonal Rotator option allows samples to be measured at any angle with respect to the magnetic field. It does not do measurements by itself but can be used with either the ETO or resistivity options.

7) Torque Magnetometry Option (TQM): The torque magnetometer measures a sample’s magnetic moment through the application of a static magnetic field to generate a torque on a small cantilever. The torsion is measured using piezoresistive elements to study the moment as a function of magnetic field strength, temperature, or angular orientation with respect to the field.

User Support and  Scientific Advice:

Lubuna Shafeek  lubuna.shafeek@ist.ac.at

Qi Wang Qi.Wang@ist.ac.at